J Type Distribution fuseboards with HRC fuse cartridges

Wall-mounted case fabricated from 16g zinc-coated sheet steel

Hinged tray pattern covers secured by captive thumbscrews.

Mul-t-lock, provision for sealing and padlocking attachment.

Copper busbars with M16 studs for incomers

Slot in top and bottom of case fitted with removable (16g) flat steel plates. 

Back of case drilled and embossed for wall fixing. 

PVD inner insulating screen with apertures to pass the front of fuse units and fillets between phases. 

Finish: casework stove-enamelled dark grey shade BS632. 

Steel screws and component parts zinc plated. 

Spreader boxes are available for larger cables. 

Type tested - rated fused short circuit current 50KA - 415V. Dielectric Test 2.5KV for one minute

Dimensions: 680mm width x 680mm length x 230mm depth, 19mm door depth. 

Ryefield J-Type Distribution Board 2 Way - Specs

Type: Ryefield J-Type Fuse Board 2 way

Dimensions: 680mm height x 680mm width x 230mm depth

Maximum busbar rating 600amp, 415V.

Sicame – UT16/C Shear head connector

Phases 95mm2 – 300mm2 Waveform conductor Solid Copper/Aluminium construction.

BTCNE-1S/BSM12/SL30

Neutral (16mm2 – 185mm2) stranded conductors

One connector per TPN supply